Mtron News

M2520 Series Oscillator

April 18, 2023

M2520 Series Oscillator   Mtron today introduced the M2520 series small form factor differential output crystal oscillator. M2520 series oscillators support less than 100fs RMS Jitter with extremely tight frequency tolerance down to +/-20ppm. This oscillator has a small form factor of 2.5 x 2.0mm, supports a wide operating temperature range of -40 to +85C, […]

Read More

Ku-Band CDL Diplexer UFDX9999-10

March 1, 2023

Ku-band CDL Diplexer UFDX9999-010   MtronPTI today introduced another Ku-band CDL Diplexer – UFDX9999-010, featuring a wider pass band and phase linearity of +/-2 degrees over the temperature. The wider band and low phase linearity performance of UFDX9999-010 enables the customer’s system to support higher data transfer rates with low latency. The UFDX9999-010 is an […]

Read More

Mtron crosses for CTS Products

February 23, 2023

Mtron crosses for CTS Products Mtron continues to support industry standard 9x14mm and 5x7mm packaged frequency control products. These packages are very popular among many customers and Mtron is committed to supporting these products. CTS has announced the End of Life for products in these packages and in many cases, Mtron has a direct cross. […]

Read More

Product Portfolio for Common Data Links

February 9, 2023

Mtron’s Product Portfolio for Common Data Links (CDL) Mtron’s K-band diplexer, the UFDX9999-008, is one product of a broad portfolio of products that support Common Data Link (CDL) applications.  Mtron’s oscillators, filters, multiplexers and integrated assemblies enable secure, wideband, real-time uplink and downlink transmission of payload control and sensor data via a CDL.  Products features […]

Read More

Mtron PLL based 7x5mm Oscillators

February 2, 2023

Mtron’s PLL based 7×5 mm oscillators are available in under 14 weeks! While other oscillator manufacturers are offering lead times over 36 weeks, Mtron continues to offer delivery of clock oscillators, VCXOs, and TCXOs made in our Yankton, SD factory, in under 14 weeks. Mtron’s PLL based product families support standard and custom frequencies up […]

Read More

M1620 and M1260 Series

September 13, 2022

M1620 and M1260 series small form factor quartz crystal units Mtron today introduced the M1620 and M1260 series small form factor crystal units. The M1620 and M1260 families are available in standard and custom frequencies up to 80 MHz and provide extremely tight frequency tolerance down to +/-10ppm over the temperature range of -40 °C […]

Read More

UPF10177 Planar Bandpass Filter

August 11, 2022

UPF10177 Planar Bandpass Filter Mtron today introduced the UPF10177 Planar Bandpass Filter. Mtron is offering custom planar filter products from 1.5 GHz to 20 GHz targeted towards Electronic Warfare, Communications, SATCOM and Data Link applications. UPF10177 is a 7 pole microstrip distributed interdigital filter with a center frequency at 6 GHz, excellent rejection characteristics, a […]

Read More

M3x5x Series VCXO

July 27, 2022

M3x5x Series 3.2 x 5.0 mm High Frequency VCXO Mtron today introduced the M305x series small form factor high performance Voltage Controlled Crystal Oscillator (VCXO). The M305x series VCXO delivers jitter performance as low as 130fs at 622.08MHz across the entire operating temperature. This outstanding jitter performance supports demanding applications including data center interconnect, broadcast […]

Read More

M626x Series TCXO

April 25, 2022

M626x Series TCXO/VCTCXO Mtron today introduced a high-performance M626x series TCXO/VCTCXO. M626x series of products uses a high-Q crystal with a newer generation of integrated circuit (IC) resulting in an excellent phase noise of -156dBc/Hz at 10kHz offset and tight stability down to +/-0.1ppm over -40°C to +85°C. This product is available with standard frequencies […]

Read More

XO9085 Rackmount Integrated Frequency

April 7, 2022

XO9085 Rackmount Integrated Frequency Reference Mtron introduced today the XO9085 series Rackmount Integrated Frequency Reference, a High Stability Ultra Low Phase Noise clock reference in a standard 19 inch rack mount configuration. XO9085 is designed for use as an accurate reference clock in an automated test system or as an in-house frequency standard. Many production […]

Read More