Category: News

MtronPTI announces M1380 and M1381 Series Suitable for applications that require a wide temperature range (-55 to 125°C) and high shock (5000 g) environment. Product is in a hermetically sealed miniature ceramic through hole package and can be processed with wave or re-flow soldering. Features: Suitable for wave or re-flow soldering High stability and low aging […]

GPS L1 and L2 Band Ceramic Filters Mtron’s L1 and L2 band ceramic filters are designed for use on L1 and L2 GPS receivers. When placed in-line between the GPS receiver and the antenna, these filters provide a minimum of 27 dB attenuation outside of the GPS band.  This an effective way to reduce interference […]

Gull Wing Capability In harsh environments observed in flight applications, reliability comes first. All components and solder joint connections must perform when environmental conditions are less than ideal.  Coefficient of thermal expansion (CTE) mismatch between components and printed circuit board (PCB) can create thermomechanical stress and fatigue driving solder joints to fail.  In these types […]

Mtron Introduces Low Profile OCXO Orlando, FL,  November 3 2016  – Mtron, leader in precision frequency control and custom RF/microwave filters, today announced the release of the XO5166 Series OCXO. XO5166 is a low-profile OCXO with a 100MHz output frequency. XO5166 combines excellent frequency stability and low dynamic phase-noise in a compact hermetically sealed package. […]

Solid State High Power Amplifiers M630x series TCXO using QiKChip technology, supporting custom and standard frequencies with low phase noise making it suited to be optimal reference clock for any communication applications. This family of products uses in-house AT-cut crystal expertise for higher performance and accuracy, available for quick samples and supports volume production. Product […]

Mtron has successfully passed the J STD 001FS Mtron, a supplier of filters and resonators into the Satellite market has successfully passed the J-STD-001FS (Space Addendum) for hand soldering operations audit performed by a leading  United States  Aerospace corporation.  Compliance to J-STD-001FS expands the number of applications and opportunities that Mtron can support.  Mtron has […]

Broadcom Reference Clocks Mtron Oscillator Products provides industry leading performance and complements Ethernet Switch design using Broadcom 10G/40G/100G Ethernet PHY/Gearbox and Switch products. Available reference designs can be found in Mtron Reference Design table located at https://mtron.com/reference-designs/. Contact Info: Param Nampoothiri Mtron Orlando Param@Mtron.com 407-298-2000 Downloads:

Laser Welded Surface Mount Hermetic Filters Since 2007, Mtron has maintained internal capabilities for laser welding hermetic packages used across all Mtron product lines.  The package shown below is one of more common laser welded packages used for high-rel / military based lumped element (LC) filters.  The package is easily capable of meeting strict hermeticity levels of […]

Mtron Introduces Low G-Sensitivity OCXO with Electronic Vibration Compensation Orlando, FL, May 11 2016  – Mtron, leader in precision frequency control and custom RF/microwave filters, today announced XO5503 Series Low G-Sensitivity OCXO with Vibration Compensation for Military and radar application. XO5503 is designed for application where superior performance is required under high vibration environment. In […]

Mtron Introduces a Line of Ultra Low Phase Noise VCXO Orlando, FL, May 12, 2016  – Mtron, leader in precision frequency control and custom RF/microwave filters, today announced XO7013 series ultra low phase noise VCXO for telecommunication, instrumentation, Avionics and wireless applications. XO7013 achieves industry leading phase-noise performance, with LVCMOS output available with absolute pull […]