
9 x 14 mm, 1.8/2.5/3.3 V, LVPECL/LVDS/CML, VCXO
Parameter | Symbol | Minimum | Typical | Maximum | Unit | Notes |
---|---|---|---|---|---|---|
Frequency Range | FR | 50 | 1400 | MHz | Contact factory for standard frequency availability over 945 MHz. | |
Frequency Stability | ΔFT/F | ±25 | ppm | |||
Operating Temperature | TA | (See Ordering Information) | °C | |||
Storage Temperature | TS | -55 | +125 | °C | ||
Aging | -3 | +3 | ppm | |||
Aging | -1 | +1 | ppm | |||
Input Current | IDD | 125 | mA | LVPECL/LVDS/CML | ||
Symmetry (Duty Cycle) | 45 | 55 | % | LVPECL: Vdd-1.3 V | ||
Symmetry (Duty Cycle) | 45 | 55 | % | LVDS: 1.25 V | ||
Rise/Fall Time | tR/tF | 0.23 | 0.35 | ns | @ 20/80% LVPECL, LVDS, CML | |
Logic "1" Level | VOH | Vcc-1.02 | V | LVPECL | ||
Logic "0" Level | VOL | Vcc-1.63 | V | LVPECL | ||
Output Load | See Load Circuit Diagram in this Datasheet. Consult factory with nonstandard output load requirements. | |||||
Output Load | 50 Ohms to (Vcc –2) Vdc | LVPECL Waveform | ||||
Output Load | 100 Ohm differential load | LVDS/CML Waveform | ||||
Differential Voltage | 250 | 350 | 450 | mV | LVDS | |
Differential Voltage | 0.7 | 0.95 | 1.20 | Vpk-pk | CML | |
Output Skew | 20 | ps | LVPECL | |||
Output Skew | 15 | ps | CML | |||
Output Skew | 20 | ps | LVDS | |||
Gain Transfer Function | 90 | ppm/V | For ±50 ppm APR | |||
Gain Transfer Function | 135 | ppm/V | For ±100 ppm APR | |||
Gain Transfer Function | 180 | ppm/V | For ±200 ppm APR | |||
Gain Transfer Function | 90 | ppm/V | For ±50 ppm APR | |||
Gain Transfer Function | 135 | ppm/V | For ±100 ppm APR | |||
Gain Transfer Function | 180 | ppm/V | For ±200 ppm APR | |||
Linearity | 1 | 5 | % | Positive Monotonic | ||
Modulation Bandwidth | 10 | -3 dB bandwidth | ||||
Input Impedance | 500k | 1M | kΩ/pF | @ DC | ||
Startup Time | 10 | ms | ||||
Phase Jitter | ΦJ | @622.08 MHz | 0.25 | ps RMS | Integrated 12 kHz – 20 MHz |
Parameter | Method/Condition | Note |
---|---|---|
Mechanical Shock | MIL-STD-202, Method 213, Condition C (100 g, 6 ms duration, ½ sine wave) | |
Vibration | MIL-STD-202, Methods 201 & 204 (10 g from 10 Hz to 2000 Hz) | |
Max Soldering Conditions | See Solder Profile | |
Hermeticity | MIL-STD-202, Method 112 (1 x 10^-8 atm. cc/s of helium) |
Please refer to the Datasheet.
Please refer to the Datasheet.